oscillation intensity meaning in Chinese
振荡强度
Examples
- As the injection current is increased above the threshold value (10.7-24), the laser oscillation intensity builds up .
当注入电流增加到由式(107-24)表示的阈值以上时,激光振荡强度就会增长。 - As the injection current is increased above the threshold value ( 10 . 7 - 24 ) , the laser oscillation intensity builds up
当注入电流增加到由式( 10 7 - 24 )表示的阈值以上时,激光振荡强度就会增长。 - The heat transfer enhancement is different under different oscillator . there is the optimum oscillation intensity under which the heat transfer coefficient will be increased by about 30 percent . the change of outlet structure size of a resonance chamber shows little effect on the strength of heat transfer : the pressure of the optional heat transfer coefficient always is between 0 . 4mpa and 0 . 6mpa , and the optional heat transfer coefficient is enhanced by 30 percent or so
不同的振荡强度,强化换热的效果也不同,存在一个最佳强度,此时的强化换热效果最好,可以将表面换热系数提高30 %左右;对于同一共振腔,配合以不同的出口结构尺寸,对于换热效果的强化的影响变化不大:出现最佳强化效果时的压力基本都在0 . 4 - 0 . 6 ,最佳的强化效果也都是将表面换热系数提高30 %左右。 - For the same configuration resonance chamber , the intensity of the self - oscillation is changed by the waterpower parameters . when the pressure increases , self - oscillation intensity will increase . by applying the self - oscillation generated by the resonance chamber to the heat exchanger , and when the self - oscillation intensity achieves a certain degree , heat transfer will be enhanced
对于同一结构的共振腔,水力参数不同,产生的自激振荡强弱也不相同,随着压力的增加,自激振荡的强度也增加;将共振腔产生的自激振荡引入换热器后,当自激振荡达到一定程度的强度后,可以强化换热。